![]() ![]() Adding a rounded corner generally alleviates this problem. These small round-overs will improve the overall quality of the print because the nozzle will struggle to make a perfectly sharp corner, and you will often end up with small bulges. Once the slot is cut, come back with the fillet tool under the ‘Modify’ menu and add 0.5mm fillets at all the edges of the slot. Exit the sketch and use the Extrude tool to pull the cut through the guide to a depth of 41mm providing for a small relief at the bottom for the sawblade. Dimension the slot at 1mm in width and make sure it extends across the entire body. Create another sketch on the top surface of the legs and use the ‘Center Rectangle’ tool under the Sketch menu to draw a vertical shape with the center at the origin. We’ll add this right in the center of the guide. ![]() The last feature to add to the miter guide is a straight slot for making 90 degree cuts.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |